AutoScanner Opel CAN

AutoScanner Opel CAN

Updates

If you are using AutoScannerOpelCAN 2.0.1.18 or a later version you can check for updates and download it from the official website using the menu item "Help - Check for Updates". You can contact the developer as well: info@opel-scanner.com.  

Beginning from the 2.0.1.23 version there will be required a license for correct functioning of the software..

Licensing Features:

1. A user may register their software on not more than 3 different PCs. If extra registration is needed (system reinstallation, PC replacement, etc.) one is to contact info@opel-scanner.com. Every case will be considered individually.

2. The license doesn't allow any language change, i.e. if the registered version uses EN-RU it will be impossible to shift to EN-DE. Please, pay attention to the language version you choose while registering your software.

3. Only registered adapters may be used with the software.

4. The email address used for registration should be the same as the one in the license request, otherwise the license won't be granted.

Online registration (if your PC is connected to the Internet): NB! The software must be registered on the computer you are planning to use for work with this software.

1. Run the software.

2. Connect the interface.

3. Choose the menu item Help -> Registration.

4. You will see a window where you are to insert your Name and Email. Your Name must contain Latin characters only. It's important to use a real and functioning email address.

5. Make sure that the inserted data is correct and press Register.

6. If everything is done correctly, you will receive a message about successful registration in a few seconds. Your software is ready for work.

7. Besides, a letter with an attached file will be sent to your email. This file contains a backup copy of your license in case your license is somehow damaged. In order to recover the license you are to save the file on the hard drive changing the file extension from .txt to.reg and double click on it. The license will be saved on your PC.

Offline registartion (if your PC isn't connected to the Internet):

1.Run the software on the PC you are planning to use for work with this software.

2. Connect the interface.

3. Choose the menu item Help -> Registration.

4. You will see a window where you are to insert your Name and Email. Your Name must contain Latin characters only. It's important to use a real and functioning email address. 

5. Make sure that the inserted data is correct and press Register.

6. In the software folder you will see a text file containing a license request.

7. You are to send this file to info@opel-scanner.com asking for license generation.

8. In response you will receive a letter with an attached file. This file contains your license. In order to activate it you are to save the file on the hard drive changing the file extension from .txt to.reg and double click on it. The license will be saved on your PC and allow you to use all the software functions.

AutoScanner Opel CAN (PRO) software and hardware solution (also known as OpelScan, Opel-Scan, Opel-Scanner) is intended for diagnostics, chip tuning, odometer correction and special functions activation. Some features of the device excel those of dealer scanners.

OpelSacnnerCAN is a multi-purpose diagnostic scanner. It supports the following models:

  • Agila-A(1998-2007)
  • Agila-B (2008-2010)
  • Antara (2007-2010)
  • Ascona (1987-1989)
  • Astra-F (1992-2002)
  • Astra-G (1998-2006)
  • Astra-H (2004-2010)
  • Astra-J (2010-)
  • Calibra (1990-1997)
  • Corsa-A/Combo (1987-1993)
  • Corsa (Vita)-B (1993-2000)
  • Corsa (Vita)-C (2001-2010)
  • Corsa (Vita)-D (2007-2010)
  • Frontera-A (1992-1998)
  • Frontera-B (1999-2003)
  • Insignia (2009-2010)
  • Kadett-E (1987-1991)
  • Meriva-A (2003-2009)
  • Meriva-B (2010-)
  • Omega-A (1987-1994)
  • Omega-B (1994-2003)
  • Senator-B (1987-1993)
  • Sintra (1997-1999)
  • Speedster/VX220 (2001-2006)
  • Tigra-A (1995-2000)
  • Tigra-B (2005-2010)
  • Vectra-A (1989-1995)
  • Vectra-B (1996-2001)
  • Vectra-C/Signum (2002-2010)
  • Zafira-A (1999-2005)
  • Zafira-B (2005-2010)
  • Suzuki Grand Vitara (2005-2010)
  • Saab 9-3 CAN (2002-2010)

Diagnostics of ALL electronic systems is supported on most models:

  • Engine Management
  • Automatic Transmission
  • Distributor Transmission 4WD
  • ABS — Anti-Lock Brake System and ESP — Electronic Stability Program
  • Traction Control
  • Air Bag
  • Immobilizer and ATWS — Anti-Theft Warning System
  • Central Door Locking System
  • Info Display
  • Instrument
  • Power Steering
  • Audio System
  • Air Conditioning System and Climate Control
  • Sliding Roof
  • Electronic Seat Memory
  • Add-On Heater
  • Headlamp Leveling Device

And many others...

New models and systems are added regularly.

The following functions are available when working with the systems mentioned above:

  • Reading ID parameters of control units: VINs (stored, for example, in the ECU), unit numbers as a spare part, hardware and software (firmware) versions, system type or model (e.g. engine models for the ECU), etc.
  • Fault codes reading and clearing. Fault codes definition, error status (current or stored) and conditions under which the control unit registers the fault code.
  • Viewing the current parameters of the control system. Besides the list of digital values, one parameter is represented graphically in this mode. In addition, standard values are provided for a number of parameters.
  • Enhanced mode of parameters graphic analysis: in this mode you can see up to 4 charts of parameter variations simultaneously.
  • Actuators control: valves, nozzles, ignition coils, fans, indicator lamps, relays, controllers, etc. For some tests there are tooltips containing test realization conditions.
  • Memory (firmware) reading of some control units.
  • Memory (firmware) flashing of some control units.
  • Mileage correction for some dashboard types (through the diagnostic link connector)
  • Vectra B 1996-2002. VDO, Astra G VDO, Zafira A (till 2000).
  • Transponder keys replacement for immobilizers of the first (IMMO1), second (IMMO2) and third (IMMO3 Vectra C, Astra H, Corsa D) generation (login is required).
  • Trip computer (Board Computer) and control system (Check Control) enabling on some GID displays of Astra H and Zafira B (See more).
  • Programming of different modules configuration (including cruise control activation) and CAN network (low, medium and high speed) for some models.
  • Clutch bleeding and engagement point adjustment for robotized MTA of the following models: Astra H, Vectra C, Zafira B, Corsa D.

The device software has friendly interface and is regularly updated.

 

OpelScannerCAN (PRO)

 

OpelScannerCAN (PRO) is a special function software working with the OpelScannerCAN adapter and a special dongle (purchased separately). The software allows:

  • To read security codes (PIN) from various control units (ECUs, data displays, dashboards, etc.)
  • To reset ECUs
  • To correct the mileage in ECUs
  • To change engine hours in ECUs
  • To read firmware of a number of ECUs

It functions with the following vehicles and systems:

  • Agila-A (1998-2007) (ECU)
  • Astra-G (1998-2006) (ECU)
  • Astra-H (2004-2010) (ECU and data display)
  • Corsa (Vita)-C (2001-2010) (ECU and dashboard)
  • Corsa (Vita)-D (2007-2010) (ECU)
  • Meriva-A (2003-2009) (ECU and dashboard)
  • Omega-B (1994-2003) (ECU)
  • Vectra-B (1996-2001) (ECU)
  • Vectra-C/Signum (2002-2010) (ECU and data display)
  • Zafira-A (1999-2005) (ECU)
  • Zafira-B (2005-2010) (ECU and data display)

It functions with the following ECU types:

  • Motronic M155
  • Motronic ME155
  • Motornic ME761
  • Motronic ME76x
  • Motronic ME96 (Z28NEx)
  • Motronic ME311 (Y26SE, Y32SE)
  • Simtec 71 (Z18XE(L))
  • Multec H ISO (Y16XE, Z14XE, Z16XE, Z16SE)
  • Multec H CAN (Z16XE)
  • Multec SF (X14XE, X16XEL)
  • HDRC
  • Multijet 6J0
  • EDC16 (Z17DTH, Z19DT(H))
  • MT35E (Z16XEP, Z16XE1)
  • PSG16 ISO/CAN.

CanPRO features can be extended with the help of additional modules: ODO, SRS, PIN2.

 

OpelScannerCAN Flasher

 

OpelScannerCAN Flasher allows reading and flashing flash memory controllers installed in Opel vehicles. It functions with the OpelScannerCAN adapter and a special dongle (purchased separately).

The software has module structure, making it possible to activate any module independently.

OpelScannerCAN Adapter Technical Specifications

  • Most ISO and CAN protocols support
  • Full-speed USB connection to a PC
  • All CAN bus types support (High Speed, MidSpeed, LowSpeed)
  • Built-in multiplexer
  • Galvanic separation and short-circuit protection
  • Adapter microcode USB updates
  • The adapter is built in the OBD-II connector case.

 

Updates for AutoScannerOpelCAN are free within 12 months.

 

ATTENTION: Official users will have a 17% discount on the new version of hardware. In order to use the discount, insert the discount voucher code: «new opel». The device will be delivered after the manufacturer confirms the discount: info@opel-scanner.com.

Package

  • OpelScannerCAN adapter
  • Software (sent via email)
Brand: Opel Scanner

Basic set:



USB Dongle:



CanPRO modules:



Flasher modules:



Subscription for AutoScanner Opel CAN:



0
Qty: