VAG Immo Calculator
Item no.:
- Dongle
- Basic software
VAG Immo Calculator is a tool for working with VAG IMMO data. It has the basic software as well as additional modules. There is no file limit per day, you can use the dongle on as many PCs as you need. The tool will not work with dongle-sharing software.
The basic package includes the following modules:
VAG: MEDC17 Immo
- Support for MED17/EDC17 units with immo versions 4 and 5.
- Editing of all immo data stored in EEPROM. For units with an on-chip SHE/HSM crypto module, editing of the CS and full immo data transfer are not possible.
- Ability to disable the immo and change its status for units with immo version 4 and change its status for units with immo version 5.
- Data export and import, including from other units (e.g., the Passat CCM comfort unit).
- Unit cloning for immo versions 4 and 5.
- Import of immo version 4 data from third-party programs: VVDI, SMOK, CARPROG, and immo version 5 from VVDI.
VAG: PCR2.1 Immo
- Editing of all immo data stored in EEPROM.
- Data export and import, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning.
- Immobilizer data import from third-party software files: VVDI, SMOK, CARPROG.
VAG: CCM Immobilizer
- Editing all immobilizer data.
- Ability to change unit status.
- Data export and import, including from other units (e.g., MED17).
VAG: BCM2 A4, A5, Q5
- Support for BCM2 units with both external and internal EEPROM.
- Editing all immobilizer data stored in EEPROM.
- Editing component configuration.
- Exporting immobilizer data.
- Fixing ELV 02811 error.
VAG: MED9 No Crypt
- Support for MED 9.1, MED 9.5.10 units.
- Editing all immobilizer data stored in EEPROM. - Export and import data, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning.
- Import immobilizer data from third-party software files: VVDI, SMOK, CARPROG
VAG: EDC16 Immo
- Editing all immobilizer data stored in EEPROM.
- Export and import data, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning.
- Mileage adjustment.
- Import immobilizer data from third-party software files: VVDI, SMOK, CARPROG
VAG: PPD 1.x Immo
- Editing all immobilizer data stored in EEPROM.
- Export and import data, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning.
- Import immobilizer data from third-party software files: VVDI, SMOK, CARPROG
VAG: AUDI ELV Immobilizer
- Editing all immobilizer data.
- Export and import data, including from other modules (e.g., BCM2 Audi).
- Module cloning
VAG: MM 7GV Immobilizer
- Editing all immobilizer data stored in EEPROM.
- Export and import data, including from other modules (e.g., Passat CCM comfort module).
- Module cloning.
- Import immobilizer data from third-party software files: VVDI, SMOK, CARPROG
VAG: MM 9GV Immobilizer
- Editing all immobilizer data stored in EEPROM.
- Export and import data, including from other modules (e.g., Passat CCM comfort module).
- Module cloning.
- Import immobilizer 4 data from third-party programs: VVDI, SMOK, CARPROG, and immobilizer 5 from VVDI
VAG: AUDI A6/Q7 EZS Immo
- Editing all immobilizer data stored in EEPROM.
- Exporting immobilizer data.
VAG: EZS Crafter Immo
- Editing all immobilizer data stored in EEPROM.
- Exporting immobilizer data.
The technical support is provided by the developer directly.
Support for MED 9.1 and MED 9.1.1 units with immobilizer versions 4 and 5.
- Editing of all immobilizer data stored in EEPROM.
- Data export and import, including from other units (e.g., the Passat CCM comfort unit).
- Unit cloning.
- Import of immobilizer data (version 4) from third-party software files: VVDI, SMOK, CARPROG
All MED9 units are supported
- Editing PowerClass and vendor data in the flash file.
All MED17 and EDC17 units are supported.
- Editing PowerClass and vendor data in the flash file.
Support for Simos 8.1, 8.2, 8.3, 8.4, 8.5, and 8.6 units with immobilizer versions 4 and 5.
- Editing of all immobilizer data stored in EEPROM.
- Ability to change immobilizer status.
- Data export and import, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning for immobilizer versions 4 and 5.
- Import of immobilizer 4 data from third-party programs: VVDI, SMOK, CARPROG, and immobilizer 5 from VVDI.
Obtaining immobilizer data for all components based on the immobilizer export file from the dashboard and the key synchronization file.
- Immobilizer data export.
- Key synchronization file generation.
Support for BCM2 units with both external and internal EEPROM.
- Editing of all immobilizer data stored in EEPROM.
- Editing of component configurations.
- Export of immobilizer data.
- Fix for ELV 02811 error.
Support for DQ200 MQB, DQ250 MQB, VL300, VL381, DL382, DL501, DQ200 MQB Gen2, DQ500, DQ381, DQ380, DQ400, AL551, and AL552 ECUs with immobilizer versions 4 and 5.
- Editing of all immobilizer data in EEPROM.
- Data export and import, including from other ECUs (e.g., BCM2).
- ECU cloning.
Support for Simos 10, 11, 12, and 18 units with immobilizer versions 4 and 5.
- Editing of all immobilizer data stored in EEPROM.
- Ability to change immobilizer status.
- Export and import data, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning for immobilizer versions 4 and 5.
- Import of immobilizer 4 data from third-party software files: VVDI, SMOK, CARPROG, and immobilizer 5 from VVDI.
Support for ELV modules from the MQB and PQ35 platforms with immobilizer versions 4 and 5.
- Editing of all immobilizer data stored in EEPROM.
- Ability to change immobilizer status.
- Data export and import, including from other modules (e.g., the Passat CCM comfort module).
- Module cloning for immobilizer versions 4 and 5.
Support for DCM 3.7 and 6.2 units with immobilizer versions 4 and 5.
- Editing of all immobilizer data stored in EEPROM.
- Ability to change immobilizer status.
- Export and import data, including from other units (e.g., Passat CCM comfort unit).
- Unit cloning for immobilizer versions 4 and 5.
- Import of immobilizer 4 data from third-party software files: VVDI, SMOK, CARPROG, and immobilizer 5 from VVDI.
Support for Simos SDI 6, 7, 8, 9, 10, and 21 modules.
- Editing of all immobilizer data stored in EEPROM.
- Data export and import, including from other modules.
- Module cloning.
