VF2 Flasher is a professional tool for automotive workshops and chip tuners designed to diagnose, repair and reprogram engine and transmission control units of cars, trucks, special vehicles, boats and yachts, agricultural and many other vehicles. The tool supports operation in Boot Mode, Bench Mode, as well as through the OBD2 diagnostic connector and is made as a 7-inch tablet with a touch screen and built-in power supply with protection against improper connection and short circuits. This design allows you to work autonomously without the use of a PC, thus significantly reducing the risks of third-party drivers, operating system and other software interference in the programming process. VF2 Flasher has an innovative user interface with built-in instructions for connecting to the ECU. The device gets regular updates.

Licensing system

The tool comes in Master and SUB versions. The Master version is intended for independent work and allows you to read and write software files in the open format, as well as to unpack and pack files for SUB owners. Every master can have un unlimited number of SUB tools. The SUB (Slave) version is intended for building a dealer network and is capable of reading (S2M) and writing (M2S) files only in the crypted format. It is also possible to have the Custom Master version in Custom, when you can choose which protocols you want to use.

Support and Updates

Support and updates are available with the active subscription. The first year of subscription is included in the device price.

Please note: We are not permitted to sell this product to customers in South Korea. 

VF2 Flasher is a professional tool for automotive workshops and chip tuners designed to diagnose, repair and reprogram engine and transmission control units of cars, trucks, special vehicles, boats and yachts, agricultural and many other vehicles. The tool supports operation in Boot Mode, Bench Mode, as well as through the OBD2 diagnostic connector and is made as a 7-inch tablet with a touch screen and built-in power supply with protection against improper connection and short circuits. This design allows you to work autonomously without the use of a PC, thus significantly reducing the risks of third-party drivers, operating system and other software interference in the programming process. VF2 Flasher has an innovative user interface with built-in instructions for connecting to the ECU. The device gets regular updates.

Licensing system

The tool comes in Master and SUB versions. The Master version is intended for independent work and allows you to read and write software files in the open format, as well as to unpack and pack files for SUB owners. Every master can have un unlimited number of SUB tools. The SUB (Slave) version is intended for building a dealer network and is capable of reading (S2M) and writing (M2S) files only in the crypted format. It is also possible to have the Custom Master version in Custom, when you can choose which protocols you want to use.

Support and Updates

Support and updates are available with the active subscription. The first year of subscription is included in the device price.

Protocols and their functionality

• OBD: Wide list of supported vehicles, real and virtual reading, checksum verification and correction. One of the first solutions for Toyota/Lexus vehicles in the market, more than 1000 files in the database;
• 76F00xx (NBD): One of the first solutions in the market for working with these processors. It supports automatic CPU identification, reading, writing and recovery, work with external EEPROM, checksum verification and correction;
• TRICORE (BSL): Supports a wide range of TC17xx processors, working with internal and external memory. Automatic processor identification, password reading (including using GPT) is supported. Possibility to get all the memory contents together and separately. Reading, writing, recovery, checksum correction;
• C167/ST10F (BSL): Supports a wide range of C16x/ST10x processors with internal and external memory. Supported operation via Rx/Tx, K-Line, Can Bus. Supports automatic processor identification, possibility to read the whole memory content both together and separately. Reading, writing, recovery, checksum correction;
• SH725xx (JTAG): supports a wide range of SH725xx processors, automatic CPU type identification. Reading, writing, recovery, checksum correction;
• SH705x (JTAG/AUD): supports a wide range of SH705xx processors, automatic CPU type identification. Reading, writing, recovery, checksum correction;
• MPC5xx (BDM): supports a wide range of MPC5xx processors with internal and external memory; work with external EEPROMs. Supports automatic processor identification and memory type. Reading, writing, recovery, checksum correction;
• MC683xx (BDM): supports a wide range of MC683xx processors, automatic CPU type identification. External memory of different kinds is supported. Reading, writing, recovery, checksum correction;
• MPC5xxx NEXUS (JTAG): supports a wide range of MPC5xxx processors. Reading, writing, recovery, checksum correction;
• M32R (BSL/SPI): supports a wide range of M32R processors, working with external EEPROM. Work through Rx-Tx or CSIO is supported. Reading, writing, recovery, checksum correction;
• MH7x/MH8x (BSL): reading, writing and backup of engine control units based on MH7xxx/MH8xxx MCUs. No need to open the ECU case (all connections are external). Automatic MCU detection and file size adjustment.

Please note: We are not permitted to sell this product to customers in South Korea.