Swiftec Software allows the end user to get the maximum control of modern combustion, electric and hybrid engines, transmissions and battery electronic modules and its subsystems used in vehicles such as cars, trucks, motorbikes, tractors or boats to accomplish different special or daily vehicles aftermarket service tasks!
A huge database of map predefined and can be extended using the unique map recognition module, a simple and user-friendly interface, featuring 2D / HEX and MAP modes, including map manager module. More than 35 automated modules, that transform a job that was previously very hard into a "One Click" operation with addition of thousands of great and unique solutions, making Swiftec Software unbeatable and a must have tool in every workshop!
Swiftec is evolving with the automotive market and we are always looking out for new possibilities to make our costumers' lives easier. We make costumers' expectations a reality!
The tool comes in three options: Full, Standard and Basic.
|
Basic Pack |
Full Pack |
Standard Pack |
|
|
|
There is also Membership and separate Subscription.
English, French, German, Polish, Portuguese, Russian, Spanish, Turkish
Limit: 7 projects per day
The technical support is provided by the developers directly.
TVA Removal Module
Throttle valve actuators regulate the air or mixture supplied for the combustion engine.
Depending on the engine concept, this serves different purposes. In the case of petrol engines, speed and power output are regulated by means of fresh air or mixture dosing. Diesel engines generally do not need a throttle valve. However, in modern diesel cars, throttling the amount of intake air facilitates precision control for exhaust gas recirculation and stops the engine from shaking when the ignition is switched off.
The TVA is often linked to many problems by our customers.
The TVA Removal Module only runs on supported firmware.
List of vehicles currently covered by TVA Removal Module:
Alfa Romeo
BMW
Caterpillar
Chevrolet
Dacia
Fiat
Ford
Hako
Honda
Hyundai
Iveco
Jeep
Kia
Kubota
Mazda
Mercedes
Mini
Mitsubishi
Nissan
Opel
Porsche
PSA (CITROËN/PEUGEOT/DS)
Renault
Saab
Suzuki
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
TORQUE Monitoring Disable
As you know, in newer ECUs, many tuners face now a new problem, the Torque Monitoring function. This function makes the ECU detect if the values of Torque are inconsistent with predefined ones and this will make the car go into safe mode when apparently all is OK.
Well after many requests, we provided to our Swiftec customers a workaround to this.
This module will allow everyone to tune a car and stop being worried about this feature contained in most modern ECUs.
The Torque Monitoring Disable only runs on supported firmware.
List of vehicles currently covered by Torque Monitoring Disable:
Alfa Romeo
BMW
Chana
Chevrolet
Chrysler
Dacia
Deutz
Dieci
Dodge
Ducati
Durso
Fiat
Foday
Force
Ford
Genesis
Honda
Hyundai
Infiniti
Isuzu
Iveco
JAC
Jaguar
Jeep
JMC
Kia
Lancia
Land Rover
Logset
Mahindra
Maserati
Massey Fergusson
Maxus
Mercedes
MG
MINI
Nissan
Mitsubishi
Opel
Piaggio
PSA (CITROËN/PEUGEOT/DS)
Renault
Saab
Ssang Yong
Suzuki
Tata
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Valtra
Volvo
ZX Auto
STARTSTOP Disable Module
Everybody knows that sometimes startstop can be very annoying, as everytime the car is driven it has to be switched off to avoid car switching itself off.
With this module, startstop function stays inactive so the car will behave its combustion engine on all the time, and the driver doesn’t need to worry anymore to disable this function all the time.
The StartStop Disable Module only runs on supported firmware.
List of vehicles currently covered by StartStop Disable Module:
Alfa Romeo
Bentley
BMW
Chevrolet
Fiat
Ford
Hyundai
Kia
Land Rover
Mazda
Mercedes
Mini
Nissan
Opel
Porsche
PSA (CITROËN/PEUGEOT/DS)
Renault
Suzuki
TAC
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
SPEED LIMITER Removal Module
As the name says, this module allows tuners to remove speed limit that manufacturers introduce in many cars.
We have also been developing a unique solution for MEDC17 that will work via Switch.
This speed limitation will be handled by simple switch that Swiftec will recognize automatically and our software will disable it.
The Speed Limiter Removal Module only runs on supported firmware.
List of vehicles currently covered by Speed Limiter Removal Module:
Agrifac
Alfa Romeo
Alpine
Bentley
BMW
BMW Motorrad
Bonetti
Bugatti
Cadillac
CAN-AM
CAN-AM MOTO
Case
CF Moto
Chevrolet
Claas
Dacia
DAF
Dodge
Fiat
Ford
GAZ
Geely
Higer Bus
Holden
Honda
Hyundai
Isuzu
Iveco
Jaguar
Jeep
Jinbei
John Deere
Kawazaki
Kenworth
Kia
KTM
Lamborghini
Lancia
Land Rover
LDV
Lexus
Mazda
McCormick
Mercedes
Mini
Mitsubishi
Morgan
MV Agusta
New Holland
Nissan
Opel
Polaris
Porsche
Pouchain
PSA (CITROËN/PEUGEOT/DS)
Renault
Saab
Smart
SeaDoo
Segway
SOR
Subaru
Suzuki
Tata
TigerCat
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
Yamaha
Yutong
Zotye
Remote Update Module
This Swiftec module makes the update procedure simple for our users.
When starting the software, Swiftec checks if there are any updates, either to checksums or to main software, and a simple click will update its version, keeping every latest software addition possible, for users with an active license.
OBD Reading Protection
This module was created so tuners can prevent the copy of their work, protecting a file to be read by others via OBD with any tool.
It also works automatically such as DPF/FAP removal module. When saving file, user will be asked if they want or not to protect their work.
The OBD Reading Protection only runs on supported firmware.
By activating the read protection other functions such as write process, dealer software update, and normal diagnostic functions will remain active and available.
Protection can be applied to:
Maps Recognition Module
This is an unique artificial intelligence module. As the Swiftec slogan says "Forget The Limits", we at Swiftec take this very seriously and it’s because of those old limits that we insist in forgetting that we this module was created. Forget map files, Forget driver files, Forget setting files, Forget xml files! Swiftec now does all automatically!
The Maps Recognition Module only runs on supported firmware.
Automatical map recognition module from Swiftec sets another standard in the industry making it a unique software.
Swiftec now finds all maps automatically and:
Swiftec does all this automatically with no need of going online download any file or paying any fee. Swiftec one more time forgot the limits!
Current ECU list suported by Swiftec's AI module (new ecus constantly being added):
Alfa Romeo
BMW
CASE
Chevrolet
Dacia
Chrysler
Dodge
DSG
Fiat
Ford
Honda
Hyundai
Jaguar
Jeep
John Deere
Lamborghini
Kia
Land Rover
Lancia
Lexus
MAN
Mazda
Mercedes
Mercedes Trucks
Mini
Mitsubishi
Nissan
Opel
Porsche
PSA (CITROËN/PEUGEOT/DS)
Renault
Rover
Scania
Saab
Smart
Subaru
Suzuki
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
Volvo Trucks
Maps Detection Module
For sure the most important module in tuners view as Swiftec will show the user the various possible maps contained on a ECU firmware.
The Maps Detection Module only runs on supported firmware.
If the Bosch autodetection is not big news we also have this detection for may other types such as:
Denso maps detection is something cool as Swiftec doesn't only detect maps and its size, but also it detects the conversion values contained in each map and, in this ECU, this information is crucial.
MAP Manager Module
When the maps are not found under the map detection module, Swiftec allows the creation of own maps offering the possibility of using formulas to obtain correct conversion values and predefined formulas for Bosch ECUs such as Temp, Pressure, Percentage.
Swiftec users also have the possibility of saving their own created formulas for future use.
MAF Removal Module
MAF deactivation is not by any means recommended as it is a very important sensor for fuel regulation. But sometimes (normally on high powered tuned cars) the MAF reading hits the high value and reaches maximum allowed voltage read by its sensor, creating a fault code registration and normally a safe mode.
With this module it's possible for customers to simply disconnect the MAF and the car will run without any safe mode and can achieve more power without any concerns of having additional problems.
The MAF Removal Module only runs on supported firmware.
List of vehicles currently covered by MAF Removal Module:
Alfa Romeo
BMW
Chevrolet
Dacia
Dodge
Fiat
Ford
Etalon
Holden
Infiniti
Kia
Lancia
Land Rover
Mercedes
Mini
Mitsubishi
Nissan
Opel
PSA (CITROËN/PEUGEOT/DS)
Renault
Ssang Yong
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Launch Control Module
Enabling launch control on your car, means that Swiftec will automatically setup the software so that until 4-6 KM/H the RPM is limited to 2500-2750rpm.
Basically it will control the amount of power on to the wheels until the perfect traction is achieved. Once the pre determined speed is reached the RPM Limiter will automatically move to normal on RPM and maximum power is passed into wheels.
The Launch Control Module only runs on supported firmware.
List of vehicles currently covered by Launch Control Module:
BMW
Fiat
Ford
KIA
Lamborghini
Opel
Porsche
Renault
Suzuki
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Lambda/O2 Removal Module
This module will allow customers to remove lambda errors when a new cat is fitted or when it’s removed.
The working procedure follows the way of our other already existing modules. After inserting all information on project properties about car brand, ecu type, etc. Swiftec will automatically detect it and when saving file will ask if the lambda is to be removed or not.
We hope with this new module meets some of our customers demands, and of course we will keep adding more ECU models.
The Lambda/O2 Removal Module only runs on supported firmware.
List of vehicles currently covered by Lambda/O2 Removal Module:
Alfa Romeo
Alpine
Aston Martin
BAIC
Bentley
BMW
BMW Motorrad
Bugatti
Buick
Cadillac
Can-AM
CF Moto
Chery
Chevrolet
Dacia
Daewoo
Dodge
Ducati
Ferrari
Fiat
Ford
Geely
GMC
Hako
Holden
Honda
Husqvarna
Hyundai
Infiniti
Isuzu
Iveco
Jaguar
Jeep
Jiangling
Kia
KTM
Lada
Lamborghini
Land Rover
Lancia
Lexus
Lincoln
MAN
Maserati
Mazda
McLaren
Mercedes
Mini
Mitsubishi
Nissan
Opel
Porsche
Proton
PSA (CITROËN/PEUGEOT/DS)
Ravon
Renault
Roewe
Rolls Royce
Rongwei
SAIC
SECMA
Smart
Subaru
Suzuki
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
Flaps / Swirl Removal Module
The Flaps / Swirl Removal Module only runs on supported firmware.
List of vehicles currently covered by Flaps / Swirl Removal Module:
Alfa Romeo
BMW
Chrysler
Chevrolet
Dacia
Dodge
Fiat
Ford
Hako
Honda
Hyundai
Isuzu
Jeep
Kia
KTM
Lancia
Lexus
Mercedes
Mini
Mitsubishi
Nissan
Opel
Porsche
Renault
Saab
Ssang Yong
Smart
Suzuki
Tata
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
EGR Removal Module
The EGR Removal Module only runs on supported firmware.
List of vehicles currently covered by EGR Removal Module:
Alfa Romeo
ASHOK LEYLAND
Aston Martin
Bentley
BMW
Bobcat
Bucher
Cadillac
CARUELLE-NICOLAS
Case
Caterpillar
Challenger
Chana
Chevrolet
Chrysler
Cummins
Dacia
Daewoo
DAF
Dodge
Dongfeng
Doosan
DR
Etalon
Fendt
Ferrari
Fiat
Ford
Foton
GMC
Gonow
Great Wall
Hako
HINO
Holden
Honda
Hyundai
Hyundai SeasAll
Infiniti
International
Isuzu
Iveco
JAC
Jaguar
JCB
Jeep
JMC
John Deere
Johnston Sweepers
Kia
King Long
Kioti
Krone
KTM
Kubota
Lamborghini Tractors
Lancia
Land Rover
LDV
Lexus
MAN
Massey Fergunson
Mahindra
Manitou
Maserati
Maxus
Mazda
Mercedes
Mercedes Trucks
Merlo
Mini
Mitsubishi
New Holland
Nissan
Opel
Piaggio
Porsche
ProSilva
PSA (CITROËN/PEUGEOT/DS)
QuickSilver
Renault
SCANIA
Smart
Saab
Samsung
Schaffer
Ssang Yong
Subaru
Suzuki
TAC
TAKEUCHI
Tata
Toyota
Troller
Union
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
VW Trucks
Xinchai
Yanmar
Yutong
ECU Information Detection Module
This Swiftec built-in module allows a user to obtain automatically all information contained in a loaded file.
Additionally, if the loaded file contain in its name info such as brand, model and engine type this will also be detected by Swiftec that will fill each respective field on project properties.
The following information can be detected:
BMW
Ford
VAG
Volvo
DTC Removal Module
DTC removal module allows our customers to remove individual error codes from ECU. It’s very useful when customers want to remove some parts from electronic systems such as EGR, intake flaps, etc.
Simply put the code you wish to erase, click remove and only this code will be erased from ECU, making this job as simple as possible and effective for our customers.
The DTC Removal Module only runs on supported firmware.
List of vehicles currently covered by DTC Removal Module:
AEBI SCHMIDT
AGRALE
Alfa Romeo
Arbos
ASHOK LEYLAND
Aston Martin
Bentley
BMW
Bobcat
Cadillac
CAMC
Carraro
Case
CF Moto
Changan
Chery
Chevrolet
Chrysler
Dacia
Deutz
Dodge
Dongfeng
Doosan
Ducati
Everun
FAW
Fendt
Ferrari
Fiat
Ford
Foton
Geely
GHEL
Great Wall
Higer
Hino
Honda
Hongyan
Hyundai
Infiniti
Iveco
Isuzu
JAC
Jaguar
JCB
Jeep
Jinbei
JMC
Kia
Kobelco
KTM
Kubota
Lamborghini
Lancia
Land Rover
LDV
Lexus
LynkCo
Mahindra
Manitou
Maxus
Maserati
Mazda
McLaren
Mercedes
Mini
Mitsubishi
New Holland
Nissan
Opel
Piaggio
Porsche
PSA (CITROËN/PEUGEOT/DS)
Renault
Rongwei
Saab
SAME
Smart
Ssang Yong
Subaru
Suzuki
Tata
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
Xinchai
Yanmar
DPF Removal Module
This module automatically makes the deactivation of all DPF/FAP related maps and allows the tuner to run a car without having DPF/FAP installed in it.
We have been working hard to keep this module updated to most recent cars and to assure the best result.
The functions of this module are performed automatically by Swiftec that gets the information from ECU brand, ECU model and Car brand from project properties and as soon user saves the file Swiftec will ask if the deactivation of DPF/FAP should be done.
In Swiftec v1.8.7 we created a new DPF Removal Module v2.0. For cars temporarily not covered by v2.0 you can still use DPF Removal Module v1.0. So, what does v2.0 include?
First, the final and most ideal DPF OFF solution for almost ALL Bosch EDC17 ECUs!
After many brain cells burned out we, sure with help of our customers, were able to disable every Bosch EDC17 ECU DPF by Switch.
This means no other changes are necessary no other small modifications, it's purely click and go with 100% guarantee that all would be perfect with your customer's car.
Second, for some special cases, like Opel EDC17C18/C19/C52 where as most of tuners knows no switch, after lot time of research we have made unique firmware patch, which works like Switch OFF mode!
At the moment we would run it as BETA test mode, so any comments are welcome!
Third, as for Bosch EDC16 DPF OFF we also developed a new EMULATION technique which allows customer to purely emulate inside ECU the function of a DPF!
This way car will never feel that DPF is not there and all working parameters are maintained as original. (Cruise control problems, car working in safe mod, etc.)
The DPF Removal Module only runs on supported firmware.
List of vehicles currently covered by DPF Removal Module v2.0:
AEBI Schmidt
Alfa Romeo
Bentley
BMW
Bonetti
BOUWMANN
Cadillac
Carraro
Case
Caterpillar
Chevrolet
Chrysler
Dacia
DAF
Deutz
Dodge
DONGFENG
Doosan
Everun
Fiat
Ford
Foton
Gaz
Great Wall
HINO
Holden
Honda
Hyundai
International
Infiniti
Iveco
Isuzu
JAC
Jaguar
JCA
Jeep
JINBEI
JMC
John Deere
Kenworth
Kia
Kioti
Kubota
Lancia
Land Rover
LDV
Lexus
LTI
London
Mahindra
MAN
Manitou
Maserati
Maxus
Mazda
Mercedes
Mercedes Truck
Merlo
Mini
Mitsubishi
New Holland
Nissan
Opel
Pellenc
Piaggio
Porsche
PSA (CITROËN/PEUGEOT/DS)
Qingling
Renault
Saab
Samsung
Sany
Scania
Smart
SOR
Ssang Yong
Storty
Subaru
Suzuki
Tata
Tata Trucks
Tigercat
Toyota
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Volvo
Volvo Trucks
Xinchai
Yanmar
Example of cars covered by DPF Removal Module v1.0:
Checksums
The checksum calculation is very important function of any software. Swiftec also makes this calculation for almost all ecus on market. We also develop our own solutions and checksums can be made by request.
CHECKSUMS LIST
Adblue/SCR Removal Module
With the increase of cars being equipped with this option in order to obtain a reduction of NOx emissions, as this element is expensive to maintain by car owners and with the increase of customers' requests, we decided to add this as a module to Swiftec.
Our current solution is unique and it's working by a simple switch for example on VAG car group.
The ADBlue/SCR Removal Module only runs on supported firmware.
List of cars currently covered by ADBlue/SCR Removal Module:
AGRALE
ALEXANDER DENNIS
Alfa Romeo
ARTEC
ASTRA
Bentley
BMC
BMW
BOBCAT
BRAVO
CAMC
CASE
Caterpillar
Challenger
Chevrolet
Claas
DACIA
Daewoo
DAF
Deutz
Dieci
Dingo
Dodge
Doosan
FAW
Fendt
Fiat
Ford
Foton
Freightliner
GMC
Halcon
Hino
HOWO
Hyundai
Isuzu
Iveco
Jaguar
JCB
Jeep
JMC
John Deere
Kamaz
Kenworth
Kia
Komatsu
King Long
Kramer
Kubota
Lamborghini Tractors
Land Rover
Laverda
Mack
MAN
Manitou
Massey Ferguson
Maxus
Maz
Maserati
Mazda
McCormick
Mercedes
Mercedes Truck
Merlo
Mitsubishi
New Holland
Nissan
Nissan Truck
Opel
Pellenc
Ponsse
Porsche
PSA (CITROËN/PEUGEOT/DS)
Renault
Renault Trucks
SAME
Sany
Scania
Shacman
Sinotruk
Solaris
Sor
Steyr
Storti
STS
TEMSA
Tigercat
Toyota
UD
VAG (VW, AUDI, SKODA, SEAT, CUPRA)
Valtra
Volkswagen Trucks
Volvo Trucks
XCMG
YUTONG
A2L/DAMOS Import Module
For tuners that have access to special information such as A2L and DAM files from manufacturers, Swiftec allows the use of that information by detecting the number of available maps on the loaded file and its correct offset.
Additionally, after opening the A2L/DAM project Swiftec will use information contained inside such as conversion values,map names, axis names among many other things to build your own maps accordingly to manufacturers information.
