Works with the Central Design Bureau of Electronic Control (ITELMA) on the Artery AT32F435ZGT7 MK (Flash Size: 1024KB) installed on Lada Vesta NG vehicles since 2022 or Lada Largus vehicles since 2024, which allows for full-scale repair and restoration work on these types of ECUs.
With the Central Design Bureau of Electronic Control (ITELMA) on the Artery AT32F435ZGT7 MK (Flash Size: 1024KB) installed on Lada Iskra vehicles since 2025, which allows for full-scale repair and restoration work on these types of ECUs.
Identification
Read/Clear DTCs
Read/Write FULL FLASH (the read file is sufficient for recovery via JTAG)
JTAG recovery (MDFLASHER programmer required)
Read/Write EEPROM (data area, sufficient for ECU cloning, provided the base firmware matches the ECU; otherwise, FULL FLASH must be rewritten)
Read/Write Configuration
Read/Write VIN
Ignition On/Off Function
Ignition Off/On Function
Car Key Learning
Firmware Integrity Monitoring
IMMODATA EEPROM Editor
3. With ESCL WORLDTECH ECUs on the Zhixin Z20K118 MK installed on Lada Vesta NG vehicles since 2022, which allows for full repair and restoration work on these types of ECUs.
Identification
Read/Clear DTCs
Read/Write Configuration
Read/Write VIN
Ignition On Function
Ignition Off Function
ESCL (VIRGIN) Reset allows you to restore used ESCLs to NEW condition
ESCL Learning (Linking)
ESCL Locking and Unlocking (allows you to extend or retract the latch rod)
4. With parking sensor ECUs installed on Lada Vesta NG vehicles since 2022, which allows for full repair and restoration work on these types of ECUs.
Identification
Read/Clear DTCs
Read/Write Configuration
Read/Write VIN
5. With the BUI (Itelma) and CBKE (Itelma) ECUs installed on Lada Granta vehicles since 2025, which allows for full repair and restoration work on these types of ECUs.
Identification (available since software version 2.0.1.210)
Read/Clear DTCs (available since software version 2.0.1.210)
Read/Write Configuration (available since software version 2.0.1.210)
Read/Write VIN (available since software version 2.0.1.210)
Pairing of control units (CBKE -> BUI) (available since software version 2.0.1.210)
A stable internet connection is required for operation.
Not all software versions may be supported.
