M&D Flasher is a professional tool for dashboard repair/replacement and true mileage restoration. The tool also works with immobilizers, airbags and ECUs. The software is module based and is protected with a USB dongle. It requires a J2534 adapter. It has been tested with the following adapters Dialink and Scanmatik.
 

System requirements

• Windows 10 or higher
• Intel Core i5 or equivalent processor
• 8 GB RAM
• 5 GB available hard drive space

Technical support is porvided by the developer directly.

• NB: Sales are only possible to verified (KYC) services, mileage adjustments with documentation; no shipping to Germany or restricted countries (§22b StVG and similar).
• After you receive the dongle, the modules must be activated within a month. Please be attentive and contact us in time for activation.
• Attention! In case of the dongle loss, the module transfer is not possible. You have to buy a dongle and software again.
• Please note the modules cannot be deactivated. If you provide the wrong dongle number, no refund will be possible. Also if you happen to buy a module you already have, no refund will be possible. Please be attentive.

M&D Flasher is a professional tool for dashboard repair/replacement and true mileage restoration. The tool also works with immobilizers, airbags and ECUs. The software is module based and is protected with a USB dongle. It requires a J2534 adapter. It has been tested with the following adapters Chipsoft J2534 Lite & K-line, Chipsoft J2534 Mid & K-line.

The full version includes:

• M&D Flasher USB dongle;
• ALL the software licenses on the moment of purchase, you can find the list here; 

NB: Sales are only possible to verified (KYC) services, mileage adjustments with documentation; no shipping to Germany or restricted countries (§22b StVG and similar).

M&D Flasher adapter is a professional tool for help with dashboard repair/replacement and true mileage restoration.

NB: Sales are only possible to verified (KYC) services, mileage adjustments with documentation; no shipping to Germany or restricted countries (§22b StVG and similar).

The board has the following pins VDD, FV, PWR, A1, A2, GND, RST, MD0, MD1TX, RX, RTX. Voltage levels of 3.3V and 5V are supported (selected by jumpers on the board).

Currently supported with:

1. License 109 — VW Polo 6RF(U)92086x BENCH/OBDII
2. License 139 — UAZ 9S12HY64 DASH BDM
3. License 140 — Lada Largus 2021+ ABS UART
4. License 149
5. License 22 (software 3.0 and above)
6. License 55 - MCU Renesas RH850 R7F701xxx
7. License 59 - MCU Renesas V850
8. License 150 NEC78K0 UAZ UART

This is software only, please choose "pickup from the store".

BRP Diagnostics and Service Functions via J2534

BRP Explorer is specialized software for diagnostics and service operations on the electronic control units (ECUs) of BRP vehicles. The program operates via a compatible J2534 interface, supports Bosch ME17.8.5 and Siemens M3C ECUs, and is designed for use both directly on the vehicle and for bench-based ECU connections.

Key Features

• reading ECU identification information; 
• reading and clearing Diagnostic Trouble Codes (DTCs); 
• viewing real-time engine parameters; 
• viewing operating mode history; 
• viewing engine runtime distribution across RPM ranges; 
• reading and modifying DESS key configurations; 
• adding, removing, and changing key status; 
• enabling and disabling the DESS system; 
• modifying VIN, customer name, model number, and engine serial number; 
• clearing operational history; 
• working with EEPROM files with automatic checksum recalculation.

Licensing

License: 1 PC / 1 activation
The license is tied to the computer. Transfer or reactivation is not possible, including in the event of PC failure or the replacement of major components.

System Requirements

Operating System: Windows 10 / Windows 11
Delivery format: ready-to-run EXE file; no installation required
Required for operation: a compatible J2534 adapter with the manufacturer's driver installed. 

Important Information

The program runs only on Windows 10 / 11; 
The license is tied to the PC; 
Working with EEPROM requires a file previously read by a third-party programmer; 
EEPROM cannot be read or written directly via J2534 within the current functionality of BRP Explorer.

License distribution starts after September 21, 2026.