MasterEditPro v3 by DiK — a universal calibration editor for domestic and imported vehicle ECU firmware.
The list of MEPro modules available for purchase will keep growing.
Attention: The price shown is for the electronic key including delivery; the user can choose any of the available modules (any combination of modules). The key is not sold without modules!
Includes calibration maps for M86 ECU firmware with VAZ software. Also base, uncalibrated dual-mode M86 firmware (VAZ software) and editing maps for dual-mode firmware.
Includes calibration maps for M86 ECU firmware with VAZ software. Also base, uncalibrated dual-mode M86 firmware (VAZ software) and editing maps for dual-mode firmware.
Includes calibration maps for all VAZ Bosch M7.9.7+ firmware. Works with the standard and the "compressed" firmware formats.
Includes calibration maps for all VAZ Bosch M7.9.7+ firmware. Works with the standard and the "compressed" firmware formats.
Fully includes module 1, base, uncalibrated dual-mode VAZ Bosch M7.9.7+ firmware and editing maps for dual-mode firmware.
Fully includes module 1, base, uncalibrated dual-mode VAZ Bosch M7.9.7+ firmware and editing maps for dual-mode firmware.
Includes calibration maps for all M74 and M74k firmware.
Includes calibration maps for all M74 and M74k firmware.
Fully includes module 1, base, uncalibrated dual-mode M74 (front-wheel drive) firmware and editing maps for dual-mode firmware.
Fully includes module 1, base, uncalibrated dual-mode M74 (front-wheel drive) firmware and editing maps for dual-mode firmware.
Includes calibration maps for all M73 firmware. Works with the standard firmware format.
Includes calibration maps for all M73 firmware. Works with the standard firmware format.
Fully includes module 1, base, uncalibrated dual-mode M73 firmware for LPG (all existing software versions) and editing maps for dual-mode firmware. Buyers also receive the DoubleM73 program, tied to the dongle, free of charge.
Fully includes module 1, base, uncalibrated dual-mode M73 firmware for LPG (all existing software versions) and editing maps for dual-mode firmware. Buyers also receive the DoubleM73 program, tied to the dongle, free of charge.
A program for creating dual-mode firmware for LPG with additional functions. It contains all existing M73 firmware modified for two modes (factory calibrations). Works only with a USB dongle. The program allows editing the gas calibrations and some of the petrol calibrations (full editing of petrol calibrations is available only in module 1).
A program for creating dual-mode firmware for LPG with additional functions. It contains all existing M73 firmware modified for two modes (factory calibrations). Works only with a USB dongle. The program allows editing the gas calibrations and some of the petrol calibrations (full editing of petrol calibrations is available only in module 1).
Includes calibration maps for all firmware (maps for new software versions are updated free of charge). Works with the standard (uncompressed) format. Modified firmware can be written only in BSL mode with any existing loader.
Includes calibration maps for all firmware (maps for new software versions are updated free of charge). Works with the standard (uncompressed) format. Modified firmware can be written only in BSL mode with any existing loader.
Includes additional functions: preparing ME17.9.11/12/13 firmware for writing by the diagnostic method (WITHOUT OPENING THE ECU) and disabling the diagnostic reading of ME17.9.11/12/13 firmware (also 17.9.7, 17.9.71, 17.9.8). The extended functions can be purchased if you have any module of the Bosch ME17.9.x family.
Includes additional functions: preparing ME17.9.11/12/13 firmware for writing by the diagnostic method (WITHOUT OPENING THE ECU) and disabling the diagnostic reading of ME17.9.11/12/13 firmware (also 17.9.7, 17.9.71, 17.9.8). The extended functions can be purchased if you have any module of the Bosch ME17.9.x family.
Includes calibration maps for all firmware (maps for new software versions are updated free of charge). Works with the regular (uncompressed) format. This module INCLUDES DIGITAL SIGNATURE RECALCULATION! Edited firmware can be written either by the diagnostic method (without opening the ECU) or in BSL mode with any existing loader.
Includes calibration maps for all firmware (maps for new software versions are updated free of charge). Works with the regular (uncompressed) format. This module INCLUDES DIGITAL SIGNATURE RECALCULATION! Edited firmware can be written either by the diagnostic method (without opening the ECU) or in BSL mode with any existing loader.
Fully includes module 1, base, uncalibrated 3-mode VAZ/UAZ ME17.9.7 firmware and maps for editing the 2nd and 3rd modes in this firmware. Works with the regular (uncompressed) format. This module INCLUDES DIGITAL SIGNATURE RECALCULATION! Edited firmware can be written either by the diagnostic method (without opening the ECU) or in BSL mode with any existing loader.
Fully includes module 1, base, uncalibrated 3-mode VAZ/UAZ ME17.9.7 firmware and maps for editing the 2nd and 3rd modes in this firmware. Works with the regular (uncompressed) format. This module INCLUDES DIGITAL SIGNATURE RECALCULATION! Edited firmware can be written either by the diagnostic method (without opening the ECU) or in BSL mode with any existing loader.
Includes calibration maps for Lada Largus and Renault Logan/Sandera firmware (calibration maps for similar control systems, such as Kangoo, Symbol and some others, will also be added). Maps for new EMS3132 software versions are updated free of charge. Works both with a 256 kb FullBIN and with a calibrations-only file (keep in mind that a calibrations file smaller than 32 kilobytes lacks some of the quantization axes and some calibrations). After editing, the module recalculates the checksums of the calibration area and the code.
Includes calibration maps for Lada Largus and Renault Logan/Sandera firmware (calibration maps for similar control systems, such as Kangoo, Symbol and some others, will also be added). Maps for new EMS3132 software versions are updated free of charge. Works both with a 256 kb FullBIN and with a calibrations-only file (keep in mind that a calibrations file smaller than 32 kilobytes lacks some of the quantization axes and some calibrations). After editing, the module recalculates the checksums of the calibration area and the code.
Includes calibration maps for all (known to us) KIA/Hyundai Bosch M(G)7.9.8 firmware. Maps for new Bosch M(G)7.9.8 software versions are updated free of charge. Works with the standard firmware format.
Includes calibration maps for all (known to us) KIA/Hyundai Bosch M(G)7.9.8 firmware. Maps for new Bosch M(G)7.9.8 software versions are updated free of charge. Works with the standard firmware format.
Fully includes module 1, base, uncalibrated dual-mode KIA/Hyundai Bosch M(G)7.9.8 firmware (more than 260 firmware files modified for mode switching) and editing maps for dual-mode firmware.
Fully includes module 1, base, uncalibrated dual-mode KIA/Hyundai Bosch M(G)7.9.8 firmware (more than 260 firmware files modified for mode switching) and editing maps for dual-mode firmware.
Includes calibration maps for firmware of VAZ M75 ECUs (ELCAR ECU M75). Free updates of the M75 module maps. Additional maps for transferring and clearing the learning area. Checksum recalculation, factory checksum-lock calibrations, and an extended checksum-lock software function. Works with the standard 832kb (or 768kb) firmware format. An extended set of calibrations (more than 1500) and a reduced one (to streamline small adjustments) are available for editing, including configuration, error mask, fine tuning of the torque model and much more.
Includes calibration maps for firmware of VAZ M75 ECUs (ELCAR ECU M75). Free updates of the M75 module maps. Additional maps for transferring and clearing the learning area. Checksum recalculation, factory checksum-lock calibrations, and an extended checksum-lock software function. Works with the standard 832kb (or 768kb) firmware format. An extended set of calibrations (more than 1500) and a reduced one (to streamline small adjustments) are available for editing, including configuration, error mask, fine tuning of the torque model and much more.
Fully includes module 1, base, uncalibrated dual-mode M75 firmware and editing maps for dual-mode firmware. Capabilities of the M75 dual-mode firmware: Switching of the main calibrations (more than 50). Mode switching by the O2 sensor 2 signal. In either mode you can optionally disable the fuel pump and injectors and set a delay for switching to any mode. The firmware is intended for professional LPG system builds and commercial multi-mode versions.
Fully includes module 1, base, uncalibrated dual-mode M75 firmware and editing maps for dual-mode firmware. Capabilities of the M75 dual-mode firmware: Switching of the main calibrations (more than 50). Mode switching by the O2 sensor 2 signal. In either mode you can optionally disable the fuel pump and injectors and set a delay for switching to any mode. The firmware is intended for professional LPG system builds and commercial multi-mode versions.
Includes maps of the main calibrations of M7.8.0 firmware. Maps for new Bosch M7.8.0 software versions are updated free of charge. Works with the standard firmware format.
Includes maps of the main calibrations of M7.8.0 firmware. Maps for new Bosch M7.8.0 software versions are updated free of charge. Works with the standard firmware format.
Fully includes module 1, base, uncalibrated dual-mode Bosch M7.8.0 firmware and editing maps for dual-mode firmware.
Fully includes module 1, base, uncalibrated dual-mode Bosch M7.8.0 firmware and editing maps for dual-mode firmware.
Includes calibration maps for firmware of VAZ M74.5 ECUs, also known as M74 6.38 (21127). Free updates of the M74.5 module maps. Additional maps for transferring and clearing the learning area. Checksum recalculation, factory checksum-lock calibrations, and an extended checksum-lock software function. Works with the standard 832kb (or 768kb) firmware format. An extended set of calibrations (more than 1500) and a reduced one (to streamline small adjustments) are available for editing, including configuration, error mask, fine tuning of the torque model and much more.
Includes calibration maps for firmware of VAZ M74.5 ECUs, also known as M74 6.38 (21127). Free updates of the M74.5 module maps. Additional maps for transferring and clearing the learning area. Checksum recalculation, factory checksum-lock calibrations, and an extended checksum-lock software function. Works with the standard 832kb (or 768kb) firmware format. An extended set of calibrations (more than 1500) and a reduced one (to streamline small adjustments) are available for editing, including configuration, error mask, fine tuning of the torque model and much more.
Fully includes module 1, base, uncalibrated dual-mode M74.5 firmware and editing maps for dual-mode firmware. Capabilities of the M74.5 dual-mode firmware: Switching of the main calibrations (more than 50). Mode switching by the O2 sensor 2 signal. In either mode you can optionally disable the fuel pump and injectors and set a delay for switching to any mode. The firmware is intended for professional LPG system builds and commercial multi-mode versions.
Fully includes module 1, base, uncalibrated dual-mode M74.5 firmware and editing maps for dual-mode firmware. Capabilities of the M74.5 dual-mode firmware: Switching of the main calibrations (more than 50). Mode switching by the O2 sensor 2 signal. In either mode you can optionally disable the fuel pump and injectors and set a delay for switching to any mode. The firmware is intended for professional LPG system builds and commercial multi-mode versions.
Designed for Renault/VAZ/Nissan Logan2, Sandero2, Lada Largus, Nissan Almera cars (D7F, K7M, K4M engines), MT and AT, equipped with Continental EMS3120 ECUs. The module contains a set of main calibrations, including: an extended error mask, detailed identification information, the ability to view the "reprog" log entries, calibrations for disabling O2 sensor 2 and catalytic converter monitoring, lambda control activation thresholds, start-up calibrations, torque limit and torque request calibrations, fuel cut-off, fans, injectors, canister purge and more.
Designed for Renault/VAZ/Nissan Logan2, Sandero2, Lada Largus, Nissan Almera cars (D7F, K7M, K4M engines), MT and AT, equipped with Continental EMS3120 ECUs. The module contains a set of main calibrations, including: an extended error mask, detailed identification information, the ability to view the "reprog" log entries, calibrations for disabling O2 sensor 2 and catalytic converter monitoring, lambda control activation thresholds, start-up calibrations, torque limit and torque request calibrations, fuel cut-off, fans, injectors, canister purge and more.
Designed for Renault/VAZ Logan2, Sandero2, Kaptur, Lada XRAY cars (H4M, F4R engines), MT and AT, equipped with Continental EMS3125 ECUs. The module contains a set of main calibrations, including: an extended error mask, detailed identification information, the ability to view the "reprog" log entries, calibrations for disabling O2 sensor 2 and catalytic converter monitoring, lambda control activation thresholds, start-up calibrations, torque limit and torque request calibrations, fuel cut-off, the VVTC system, fans, injectors, canister purge and more. After editing, the main and the extended calibration checksums are recalculated, which allows the firmware to be written to the ECU with any loader. Supports the maximum number of firmware files according to the vehicle data.
Designed for Renault/VAZ Logan2, Sandero2, Kaptur, Lada XRAY cars (H4M, F4R engines), MT and AT, equipped with Continental EMS3125 ECUs. The module contains a set of main calibrations, including: an extended error mask, detailed identification information, the ability to view the "reprog" log entries, calibrations for disabling O2 sensor 2 and catalytic converter monitoring, lambda control activation thresholds, start-up calibrations, torque limit and torque request calibrations, fuel cut-off, the VVTC system, fans, injectors, canister purge and more. After editing, the main and the extended calibration checksums are recalculated, which allows the firmware to be written to the ECU with any loader. Supports the maximum number of firmware files according to the vehicle data.
Includes calibration maps for firmware of naturally aspirated GDI and Turbo GDI engines (free map updates). Works with the standard (uncompressed) format. When the firmware is saved, the checksums of the calibrations and the code are recalculated, which allows it to be written in BSL mode with any existing loader.
Includes calibration maps for firmware of naturally aspirated GDI and Turbo GDI engines (free map updates). Works with the standard (uncompressed) format. When the firmware is saved, the checksums of the calibrations and the code are recalculated, which allows it to be written in BSL mode with any existing loader.
Includes calibration maps for firmware of naturally aspirated MPI engines up to 1.6 inclusive (free map updates). Works with the standard (uncompressed) format. When saving, the firmware calibration and code checksums are recalculated, which allows writing it through BSL mode with any existing bootloader, or through OBD (the diagnostic method) provided the bootloader supports it.
Includes calibration maps for firmware of naturally aspirated MPI engines up to 1.6 inclusive (free map updates). Works with the standard (uncompressed) format. When saving, the firmware calibration and code checksums are recalculated, which allows writing it through BSL mode with any existing bootloader, or through OBD (the diagnostic method) provided the bootloader supports it.
If the ME(D)17.9.811 module is installed
If the ME(D)17.9.811 module is installed
If the ME17.9.21 module is installed
If the ME17.9.21 module is installed
Includes calibration maps for VAZ firmware with the M86I ECU and ITELMA software. These are 1.8L 16v engines with VVT. Free map updates for the VAZ M86I module. Checksum recalculation, factory checksum lock calibrations, and an extended checksum lock software function. Works with the standard 1088kb firmware format.
Includes calibration maps for VAZ firmware with the M86I ECU and ITELMA software. These are 1.8L 16v engines with VVT. Free map updates for the VAZ M86I module. Checksum recalculation, factory checksum lock calibrations, and an extended checksum lock software function. Works with the standard 1088kb firmware format.
Includes the whole of module 1, plus the basic, uncalibrated dual-mode VAZ M86I firmware and editing maps for dual-mode firmware.
Includes the whole of module 1, plus the basic, uncalibrated dual-mode VAZ M86I firmware and editing maps for dual-mode firmware.
Includes calibration maps for UAZ firmware with the M86I ECU and ITELMA software. Free map updates for the UAZ M86I module. Checksum recalculation, factory checksum lock calibrations, and an extended checksum lock software function. Works with the standard 1088kb firmware format.
Includes calibration maps for UAZ firmware with the M86I ECU and ITELMA software. Free map updates for the UAZ M86I module. Checksum recalculation, factory checksum lock calibrations, and an extended checksum lock software function. Works with the standard 1088kb firmware format.
Includes the whole of module 1, plus the basic, uncalibrated dual-mode UAZ M86I firmware and editing maps for dual-mode firmware.
Includes the whole of module 1, plus the basic, uncalibrated dual-mode UAZ M86I firmware and editing maps for dual-mode firmware.
Designed for editing the data logger of M74 ECUs (with learning data stored in the processor flash) and M86 ECUs with VAZ software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.
Designed for editing the data logger of M74 ECUs (with learning data stored in the processor flash) and M86 ECUs with VAZ software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.
Designed for editing the data logger of M74.5 (6.38), M75 and VAZ M86I ECUs with ITELMA software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.
Designed for editing the data logger of M74.5 (6.38), M75 and VAZ M86I ECUs with ITELMA software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.
The module is designed for editing the data logger of VAZ Bosch ME17.9.7 and ME17.9.71 units.
The module is designed for editing the data logger of VAZ Bosch ME17.9.7 and ME17.9.71 ECUs. The module checks data integrity on opening and recalculates all necessary checksums on saving. The EEPROM is used for editing (32 or 64 kilobytes, depending on the ECU type).
The module is designed for editing the data logger of UAZ Bosch M(E)17.9.7 and M(E)17.9.71 ECUs. The module also lets you change the ECU programming counter. It checks data integrity on opening and recalculates all necessary checksums on saving. The EEPROM is used for editing (32 or 64 kilobytes, depending on the ECU type).
The module is designed for editing the data logger of UAZ Bosch M(E)17.9.7 and M(E)17.9.71 ECUs. The module also lets you change the ECU programming counter. It checks data integrity on opening and recalculates all necessary checksums on saving. The EEPROM is used for editing (32 or 64 kilobytes, depending on the ECU type).
The module is designed for editing the data logger of UAZ M86I and Mikas12 (GAZ) ECUs with ITELMA software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.
The module is designed for editing the data logger of UAZ M86I and Mikas12 (GAZ) ECUs with ITELMA software. The module checks data integrity on opening and recalculates all necessary checksums on saving. You can edit either the EEPROM alone (64 kilobytes) or the whole firmware with the learning data inside.