PG Flasher is a software program designed to read and write full FLASH and EEPROM for Hitachi controllers used in Nissan, Infiniti, and Mitsubishi Outlander vehicles. CAN, K-Line, and CAN-FD protocols are supported.
The program is protected by a Guardant DL software linked to the PC's hardware identifier. Unlimited OS reinstallation with manual reactivation is supported. License transfer to another PC (up to once every 180 days) is possible upon request. In the event of complete loss or PC failure, license recovery is impossible. The recovery service includes a new dongle and module recovery.
The software operates via J2534 adapters. The following proven adapters are available for CAN-FD use: OpenPort 2.0, Chipsoft, Scanmatik 2 PRO, and Scanmatik 3.
Online updates, checksum verification and correction, and ECU cloning without disassembling are available.
The software package includes a Guardant software protection key (no physical key required). The key is not sold separately, but only as part of a module bundle. If you have the key, you can purchase additional modules as an upgrade.
Advantages and Features
Please note: the program can be used on one PC only.
ATTENTION! This is a virtual product (software). Please select E-Mail Delivery in the cart!
Supports Nissan/Infiniti control units based on SH705101, SH705102, SH705415, and SH705507
SH7051 / SH7054 / SH705507
K-Line EEPROM Boot OBD
Supports Nissan/Infiniti control units based on SH705101, SH705102, SH705415, and SH705507 (Hitachi square units). Reads and writes full FullFlash and EEPROM. Compatible with a wide range of control units of this generation.
Nissan Almera Classic SH705524 and SH705529 control units
SH705524 / SH705529
K-Line EEPROM Boot OBD
Nissan Almera Classic SH705524 and SH705529 control units. Allows reading and writing of the full FullFlash and EEPROM.
Suitable for use with a wide range of control units of this generation.
Supports modern Nissan/Infiniti SH705520, SH705821, SH705823, SH705822, SH705826, and SH705927 control units.
SH7055/SH7058/SH7059
K-Line EEPROM Boot OBD
Supports modern Nissan/Infiniti SH705520, SH705821, SH705823, SH705822, SH705826, and SH705927 control units. Allows reading and writing of full FullFlash and EEPROM. Compatible with a wide range of control units of this generation.
SH7055 / SH7058 / SH7059
CAN EEPROM Boot OBD
Supports SH705519, SH707822, SH705828, and SH705927 control units.
Allows reading and writing of the full FullFlash and EEPROM memory image. Suitable for a wide range of control units of this generation.
Supports SH7253131, SH7253332, SH7253331, and SH7254332 control units.
SH72531 / SH72533 / SH72543
CAN EEPROM Boot OBD
Supports SH7253131, SH7253332, SH7253331, SH7254332 control units. Allows reading and writing of the full FullFlash and EEPROM. Suitable for a wide range of control units of this generation.
Supports RH850-based modules (2–4 MB)
Renesas RH850/E1 2/4MB
CAN EEPROM Boot OBD
Supports RH850-based modules (2–4 MB). Reads and writes full FullFlash and EEPROM. Direct connection to the control unit is recommended for increased reliability. For some vehicles, direct connection to the control unit is required.
BED51x units utilize CAN-FD and direct connections; J2534 adapters with CAN-FD support are required.
Supports RH850 modules (6 MB).
Renesas RH850E1 6MB
CAN EEPROM Boot OBD
Supports RH850 modules (6 MB).
Requires a direct connection to the control unit and the use of Scanmatik 3 with CAN-FD support.
Cloning is currently not possible.
Supported units: BED600-001 BED604-300 BED604-000 BED602-500 BED60B-500 BED604-500 BED607-000
Renault Hitachi SH7058 / SH72533
Renault Hitachi SH7058 / SH72533
CAN EEPROM Boot OBD
Fully supports Laguna III, Latitude, Koleos I, Koleos II, Megane IV RS, Talisman, Espace V, Samsung SM5, Samsung SM6, and Samsung SM7 ECUs via the CAN bus—both in the car and on the bench, without opening the control unit. Full, unrestricted access to Flash and EEPROM.
NISSAN TCU CVT
CAN EEPROM Boot OBD
Working with Nissan CVT control units via the CAN bus. Reading and writing firmware and EEPROM for unit repair and replacement, creating backups, and reading/clearing diagnostic trouble codes (DTCs).
Supported units with the following CPUs:
SH72531N
SH72533N
M32171F4
M32176F4
M32186F8
EEPROM reading and writing are performed via the bootloader.
Subaru Hitachi
Subaru Hitachi
CAN EEPROM Boot OBD
Working with Subaru Hitachi engine control units via the CAN bus. Reading and writing firmware and EEPROM, saving backups, and reading and clearing diagnostic trouble codes (DTCs).
Supported units with the following CPUs:
SH7059S
SH72543S
SH72544S
EEPROM operations and SH72544S Flash writing are performed via the bootloader.
PG Flasher License Recovery Service
New License
Recovery of all purchased modules
