With FLEX version 8.16.0.0, Korhex extends support to new-generation SPC58N microprocessors.

The Bosch MG1CA920 control unit from the BRP Group, used on Rotax engines, is now supported with a new dedicated procedure.

Thanks to Flex and Korhex, connection becomes simpler and more immediate: there is no longer any need to work on the PCB to remove the resistor or manually solder the Boot point.

Fewer steps, more autonomy in the workshop.

Position Korhex, follow the Flex-guided procedure, and access the SPC58N microprocessor.

Order Korhex, connect it to Flex, and manage the unlocking procedure in complete autonomy.

To access the protocol, you need either the FLS0.20 license or the Flex Full FLS0.5 configuration.

Key insights

BRP Bosch MG1CA920 SPC58N

• Working Mode: Boot Glitch
• Memories: Read/Write/Checksum Internal Flash, Read/Write Internal EEPROM, Full Backup
• Licenses: FLS0.20M/S – FLS0.5M/S
• Connect/Glitch Time: ~ 40 seconds
• Reading Time: ~ 2 minutes
• Writing Time: ~ 2 minutes

Some of the supported vehicles

• Can-Am Maverick Turbo RR (II) (2022MY) 0.9L Rotax 12v 197HP
• Sea-Doo Switch Sport (I) (2022MY) 1.6L Rotax 1630 ACE 12v 168HP
• Ski-Doo Expedition (IV) (2024MY) 0.9L Rotax 900 ACE Turbo R 12v 177HP