1. Module 58 "Temic TCU" adds service mode support for ECUs of robotic gearboxes Haval 7DCT450 (EAST80.D1) and Hyundai D7UF1-2/D7F34-2/D8LF1 (TAD701/TAD801) using TC265/TC275 microcontrollers. Supports reading and writing of built-in FLASH and EEPROM memory when directly connected to the ECU connector (no opening required), checking and correcting the CS.
2. In module 71 "Bosch MEDC17 Bootloader" the ability to read and write external EEPROM of the MEV17.2 ECU has been added.
3. In module 74 "Toyota/Lexus generation" support for the new ECU used in cars of the 2024 model year with 1GD-FTV/2GD-FTV diesel engines has been added.
4. Module 92 "Bosch MD1/MG1 Bootloader" adds support for MG1UA008 and MG1US008 ECUs installed on Chinese-made cars using SPC574K and TC277TP microcontrollers. Reading and writing operations of built-in FLASH and EEPROM memory are supported when directly connected to the ECU connector (no opening required), as well as checking and correcting the CS.
5. Module 94 "Aisin TCU Bootloader" has support for Aisin ECUs with microcontrollers Reneasas R7F701204 and R7F701216, used with automatic transmissions VAG AQ600 (09S), PSA AxN8, BMW/Mini GA8F22AW/GA8G45AW, Toyota/Lexus AJA0F. Supports reading and writing operations of built-in FLASH and EEPROM memory when directly connected to the ECU connector (no opening required), checking and correcting the CS.
6. In module 95 "Toyota/Lexus generation 4", now supports Denso ECUs with microcontroller R7F702002, installed in Toyota Wildlander and Lexus ES200 cars with 2.0L gasoline engines (M20A-FKS/M20C-FKS). Supports reading and writing of the ECU via the vehicle diagnostic connector.
