This is the complete set of ABRITES functionalities for Subaru vehicles.

The SB002 license enables key programming for Subaru 2021+ vehicles with a keyless system using OBDII diagnostics. This special function supports key programming for both Subaru BRZ 2022+ keyless models and 2020+ models with DST AES key, providing an advanced and reliable solution for the automotive sector.

Main Features:

• All Keys Lost key programming
• Spare key programming
• Key and engine registration, with or without a working key
• Check the number of active keys in the smart system
• Key deletion: removes all working keys except the one used to start the procedure
• Smart system reset and adaptation, setting the system to factory default (0 keys) and allowing reprogramming on another vehicle

Supported Vehicles:

• Subaru BRZ 2022+ (keyless) and related models
• Subaru Outback 2021/12
• Subaru Outback 2022
• Subaru Forester 2022
• Subaru WRX 2021
• Subaru 2020+ models with DST AES keyless key

ABRITES software license for working with Subaru vehicles: replace faulty ESL by resetting and syncing second-hand ESL, or syncing a new ESL with Smart system and program keys.

The SB003 license allows working with Subaru vehicles with faulty ESL modules for key programming in All keys lost situations. Using it, you can get the info from the Smart system, replace the ESL with a new or a used one and program a smart key to the vehicle.
Functionalities:

• Smart system data flash reading and programming new keys to the vehicle
• Reset and synchronize second-hand ESL module with the Smart system
• Synchronize the new virgin ESL with the Smart system

First, take the Smart system out of the vehicle and read its data flash on bench using the ZN085 ABRITES RH850/V850 Programmer. Then, use the read dump to prepare emulator TA68 (DST-AES) for the Smart system. With the TA68 emulator you can perform synchronisation between the Smart system and the new virgin ESL. You can also use a second-hand ESL module and then sync it with the Smart system. After syncing, you can learn new keys with the help of the ZN003 PROTAG Programmer.

Supported vehicles:

• All keyless Subaru vehicles 2020+

Required hardware:

• ZN085 ABRITES RH850/V850 Programmer and the CB501 cable included in its set (for reading Data flash on bench)
• TA68 DTS-AES transponder emulator (for ESL and Smart system sync)
• ZN003 Protag V2 key and transponder programmer (to program new keys)

Requirements:
AVDI with active AMS to ensure full compatibility and top performance.