Key maps

• Boost and charge: wastegate position setpoints, compressor efficiency, boost actuator characteristic, charge controller thresholds.
• Torque: torque request, maximum indicated and internal torque, throttle model, torque limiters.
• Ignition and knock: base, optimal and minimum spark advance, knock-limit correction, thresholds and maximum retard.
• Mixture and lambda: nominal lambda, enrichment for component protection, mixture adaptation by injection mode.
• High-pressure fuel: rail pressure setpoints, maximum, gradient limiting.
• Valve timing: intake and exhaust camshaft setpoints in homogeneous mode.
• Engine speed limiters: at idle, while driving, at high temperature and in emergency modes.
• Catalyst warm-up and GPF: warm-up conditions and time, soot threshold, regeneration conditions.
• Start-stop: temperature thresholds, request and inhibit conditions.
• Oil pump: oil pressure setpoints.
• Cooling: fan speed control by coolant temperature.
• Equipment: DTC (switches and masks), configuration bits.

Unit identification

TCEPro identifies the unit from the firmware file automatically and opens the matching catalog. If the file does not open, send it to support and it will be added promptly.

Applicability
Vehicles with the MG1US008 unit

• Changan CS35 Plus
• Changan Hunter
• Changan UNI-K
• Changan UNI-T
• Changan UNI-V
• Chery Arrizo 8
• Dongfeng Fengon iX7
• Dongfeng Yixuan MAX
• EXEED TXL
• EXEED VX
• FAW Bestune T77
• Geely Atlas
• GWM TANK 300
• GWM TANK 400
• Haval Dargo
• Haval F7
• Haval H9
• Hongqi HS5
• JAC T9 (Sollers ST9)
• JAECOO J7
• JETOUR T2
• Kaiyi X7
• Sinotruk VGV

The list of models and supported functions is being expanded.