0 products
3
reasons
to choose our shop
Worlwide delivery
Worlwide delivery
1 year
warranty
11 years
on the market

TGFlash Standard

Item no.:
Manufacturer
Basic equipment
TGFlash Standard — 0 $
 + Add
Status: In stock

TGFlash is a complete solution for ECU flash memory reading, virtual reading and reprogramming. TGFlash supports ECU identification, reading and DTC clearing. TGFlash communicates with ECU via any J2534 Passthru interface (OpenPort, Mongoose, PassThru ACTIA, Scanmatik, etc) or ENET cable.

KEY FEATURES

  • Standard & Master versions are purchased with at least one of the available protocols
  • Standard version has all functionality needed to read/write firmware using purchased protocols, files are open for recalibration
  • Standard version cannot have Slaves.

All TGFlash protocols automatically adjust file checksums (also known as CS) and signatures on writing.
You get a software download link and activation key via email IMMEDIATELY after your payment. No USB dongles, just a license key that links to your computer during installation. You can use the license key only on one computer and only one instance of TGFlash software
And last, but not least - we do test protocols BEFORE selling them!

REQUIREMENTS

  • Computer with Microsoft Windows 7, 8, 10. 32-bit or 64-bit
  • J2534 Passthru interface or BMW ENET cable (depending on the protocol)
  • Stable internet connection
  • Adequate car battery charger

RESTRICTIONS

  • You can't run TGFlash on virtual or cloud computers (VMware, VirtualBox, etc).
  • It is highly recommended to perform all Windows updates, replace/upgrade computer components BEFORE installing TGFlash, or even use a dedicated PC. If for any reason (HDD/motherboard fault, etc) hardware ID will change -- we allow you to reinstall TGFlash on another computer up to 2 (two) times per year, but ONLY for Master and Standard versions, for Slave, this is not possible.
  • Migration of Slave license from one Master to another is not allowed.

ACTIVATION

To apply for activation you must send us the end user email which is the login to the TGFlash personal cabinet. If you purchase a Slave license - include the Master's email. If you purchase Slave Renewal - write the Slave's email there. Please write the email in the field with the serial number.

Copyright TGFlash.com

001 BMW Fxx/Gxx Bosch MDG1 SPC5777M 7.5MB CAN/ENET Item no.:

Bosch MD1CP002, MG1CS003: Reading, Virtual reading, Writing, Checksum corrections
Software versions supported: up to 2019–11 (inclusive) and 2020–03 (partially)
Reading ⁄ Writing (Calibrations) via OBD

For the following BMW & MINI cars:
Engine: B46B20A, B48A20A, B48B20A, B58B30A (Series: F20, F21, F22, F23, F30, F31, F32, F34, F35, F36, F45, F46, F48, F55, F56, F57)
Engine: B46B20A, B47D20A, B48B16A, B48B20A, B57D30A, B58B30A, N63B44C, N74B66B (Series: G01, G02, G05, G07, G11, G12, G29, G30, G31, G32, G38)

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …) or BMW ENET cable.

OBD Read protection after writing.

319 $
002 BMW Fxx/Gxx Bosch MDG1 AURIX TC2xx 8.0MB CAN/ENET Item no.:

Bosch MD1CS001, MG1CS201, MG1CS024: Reading, Virtual reading, Writing, Checksum corrections
Software versions supported: up to 2019–07 (inclusive)
Reading ⁄ Writing (Calibrations) via OBD
For the following BMW & MINI cars:
Engine: B48A20A, S63B44B (Series: F39, F45, F46, F48, F55, F56, F90)
Engine: B48B20B, B47D20B, B58B30C, N63B44D, N74B66C (Series: G01, G02, G05, G07, G11, G12, G20, G29, G30, G31, G32)

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …) or BMW ENET cable.

Read protection after writing.

319 $
003 BMW Fxx Bosch MEVD17.2.X TC179x 4.0MB CAN/ENET Item no.:

Bosch MEVD17.2, MEVD17.2.3, MEVD17.2.4, MEVD17.2.5, MEVD17.2.6, MEVD17.2.8, MEVD17.2.9, MEVD17.2.G, MEVD17.2.H, MEVD17.8.4: Virtual reading, Writing, Checksum corrections
Software versions supported: up to 2018–03 (inclusive)

Reading ⁄ Writing (Calibrations) via OBD
For the following BMW & MINI cars:
Engine: B38A15, N13B16, N20B20, N26B20, N55B30, N63B44 (Series: F01, F02, F07, F10, F11, F15, F16, F20, F21, F22, F23, F25, F26, F30, F31, F32, F34, F35, F36, F39, F48, F54, F55, F56, F57, F60)
note: BMW M2 Competition S55B30 not supported

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …) or BMW ENET cable

181 $
004 BMW Fxx Bosch EDC17 TC1797 4.0MB CAN/ENET Item no.:

Bosch EDC17C41, EDC17C50, EDC17C56, EDC17C76, EDC17CP09, EDC17CP45, EDC17CP49: Virtual reading, Writing, Checksum corrections
Software versions supported: up to 2018–03 (inclusive)

Reading ⁄ Writing (Calibrations) via OBD
For the following BMW & MINI cars:
Engine: B37C15, B37D15, B47D20, B47C20, N47D20, N57D30 (Series: F01, F02, F07, F10, F11, F15, F16, F20, F21, F22, F23, F25, F26, F30, F31, F32, F34, F35, F36, F39, F48, F54, F55, F56, F57, F60)

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …) or BMW ENET cable

181 $
006 BMW Fxx/Gxx EGS 8HP 2.0MB / 2.5MB CAN/ENET Item no.:

EGS GKEB23, GKEB23TU, ZFBCC: Reading, Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD
For the following BMW cars:
Transmission: 8HPGKE23, 8HPGKE23TU (Series: F01, F02, F10, F11, F15, F16, F20, F21, F22, F23, F25, F26, F30, F31, F32, F34, F35, F36, F45, F46, F48, F90)
Transmission: 8HPZFBCC (Series: G01, G02, G05, G07, G11, G12, G30, G31, G32, G38)
note: 8HPZFBCE not supported

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …) or BMW ENET cable

200 $
007 BMW Exx Bosch EDC16 1.0MB / 2.0MB CAN/K-Line Item no.:

Bosch EDC16C31, EDC16CP35: Reading, Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD
For the following BMW cars:
Engine: M47, M57, M67 (Series: E60, E65, E70, E71, E90, E91, E92, E93)

You can use J2534 (Actia Passthru, Drew Technologies Mongoose, Scanmatik, Tactrix OpenPort, …)

128 $
008 BMW Exx Bosch MEVD17 TC179x 4.0MB CAN Item no.:

Bosch MEVD17.2MEVD17.2.2MEVD17.2.7MEVD17.2.9: Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD
For the following BMW & MINI cars:
Engine: N55B30 (Series: E70, E71, E81, E82, E87, E88, E90, E91, E92, E93)
Engine: N18B16 (Series: R56, R60)
note: will be added MEVD17.2.6

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

163 $
009 BMW Exx Bosch EDC17 TC1766 1.5MB / TC179x 4.0MB CAN Item no.:

Bosch EDC17C41EDC17C50EDC17C06,EDC17CP02EDC17CP09EDC17CP45: Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD
For the following BMW cars:
Engine: N47D20, N57D30 (Series: E60, E83, E84, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

163 $
011 Porsche Siemens TCU PDK TC1767 2.0MB CAN Item no.:

Siemens Continental TCU PDK: Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

319 $
012 Ford Siemens Continental SID208 TC1797 4.0MB CAN Item no.:

Siemens Continental SID208: Reading, Virtual reading, Writing, Checksum corrections
Reading (Full) via OBD ⁄ Writing (Calibrations) via OBD (Unlock isn't needed)
For the following Ford vehicles:
Engine: 2.2TDCi, 3.2TDCi (Model: Ranger, Tourneo Custom, Transit, Transit Custom)
Note: if ECU was already flashed via BDM - our software may have difficulties reprogramming it

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

128 $
013 BMW Exx/Fxx Siemens Continental MSD85/87 TC1796 2.0MB Bench Item no.:

Siemens Continental MSD85MSD87: Reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) on Bench via J2534
For the following BMW cars:
Engine: N54B30, N63B44, N74B60 (Series: F01, F02, F03, F07, F10, F11, F12, F13)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)
Generic bench connection cable can be used.

163 $
014 BMW Fxx Siemens Continental MSV90 TC1796 2.0MB Bench Item no.:

Siemens Continental MSV90: Reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) on Bench via J2534
For the following BMW cars:
Engine: N52B25, N52B30 (Series: F01, F02, F10, F11, F18, F25)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)
Generic bench connection cable can be used.

163 $
015 Porsche Siemens Continental SDI6/6.1/7/8 TC1796 2.0MB Bench Item no.:

Siemens Continental SDI6SDI6.1SDI7SDI8: Reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) on Bench via J2534
For the following Porsche cars:
Engine: 3.0 V6, 3.6 V6, 4.8 V8, 4.8 V8 Turbo (Model: Cayenne 958, Panamera 970)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)
Generic bench connection cable can be used.

163 $
017 Mercedes Bosch EDC17 TC179x 2.0MB CAN Item no.:

Bosch EDC17C66EDC17CP46EDC17CP57EDC17CP60
Reading ⁄ Writing (Calibrations) via OBD
For the following Mercedes cars:
Engine: 180 BlueTec, 200 BlueTec, 300 BlueTec, 350 BlueTec, 200 CDI, 220 CDI, 250 CDI, 350 CDI
(Model: B (W246), C (W204), C (W205), CLS (C218), E (W212), E (W213), GL (X166), GLC (X205), GLE (C292), GLK (X204), ML (W166), SLK (R172), Sprinter (W906), V (W447), Vito (W447))

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

213 $
019 Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA) Item no.:

Siemens Continental SID209: Reading, Virtual reading, Writing, Checksum corrections
HW# supported are: EB3A, GB3A
Reading ⁄ Writing (Calibrations) via OBD
For the following Ford cars:
Engine: 2.2TDCi, 3.2TDCi (Model: Endeavour, Everest, Ranger)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

128 $
020 Ford Siemens Continental SID211 TC1791 2.0MB CAN Item no.:

Siemens Continental SID211: Reading, Virtual reading, Writing, Checksum corrections
Reading ⁄ Writing (Calibrations) via OBD
For the following Ford cars:
Engine: 2.0 TDCi EcoBlue (Model: Tourneo Custom, Transit, Transit Custom)

You can use J2534 (Actia PassthruDrew Technologies MongooseScanmatikTactrix OpenPort, ...)

128 $
Hide - Show +
G001 BMW Exx Fxx Gxx Bundle 001 Item no.:

001 BMW Fxx/Gxx Bosch MDG1 SPC5777M 7.5MB CAN/ENET
002 BMW Fxx/Gxx Bosch MDG1 AURIX TC2xx 8.0MB CAN/ENET
003 BMW Fxx Bosch MEVD17.2.X TC179x 4.0MB CAN/ENET
004 BMW Fxx Bosch EDC17 TC1797 4.0MB CAN/ENET
006 BMW Fxx/Gxx EGS 8HP 2.0MB / 2.5MB CAN/ENET
007 BMW Exx Bosch EDC16 1.0MB / 2.0MB CAN/K-Line
008 BMW Exx Bosch MEVD17 TC179x 4.0MB CAN
009 BMW Exx Bosch EDC17 TC1766 1.5MB / TC179x 4.0MB CAN
013 BMW Exx/Fxx Siemens Continental MSD85/87 TC1796 2.0MB Bench
014 BMW Fxx Siemens Continental MSV90 TC1796 2.0MB Bench

1 438 $
G002 Ford SID Bundle Item no.:

012 Ford Siemens Continental SID208 TC1797 4.0MB CAN
019 Ford Siemens Continental SID209 [EB3A/GB3A] TC1797 CAN (BETA)
020 Ford Siemens Continental SID211 TC1791 2.0MB CAN

344 $
G003 BMW Fxx Gxx MDG1 Bundle Item no.:

001 BMW Fxx/Gxx Bosch MDG1 SPC5777M 7.5MB CAN/ENET
002 BMW Fxx/Gxx Bosch MDG1 AURIX TC2xx 8.0MB CAN/ENET
006 BMW Fxx/Gxx EGS 8HP 2.0MB / 2.5MB CAN/ENET

738 $
G004 BMW Fxx MEVD17/EDC17 Bundle Item no.:

003 BMW Fxx Bosch MEVD17.2.X TC179x 4.0MB CAN/ENET
004 BMW Fxx Bosch EDC17 TC1797 4.0MB CAN/ENET
006 BMW Fxx/Gxx EGS 8HP 2.0MB / 2.5MB CAN/ENET

495 $
G005 BMW Exx MEVD17/EDC17 Bundle Item no.:

008 BMW Exx Bosch MEVD17 TC179x 4.0MB CAN
009 BMW Exx Bosch EDC17 TC1766 1.5MB / TC179x 4.0MB CAN

293 $
G006 BMW MSD85/MSD87/MSV90 Bench Bundle Item no.:

013 BMW Exx/Fxx Siemens Continental MSD85/87 TC1796 2.0MB Bench
014 BMW Fxx Siemens Continental MSV90 TC1796 2.0MB Bench

293 $
Hide - Show +
User comments Cackle