Torque request: pedal maps for multiple modes, including HDC, launch, low range and high altitude, plus pedal maps in the monitoring function.
Torque limiters: maximum torque for new and end-of-life engine, full load, limiters by ambient pressure and environmental conditions, by compressor outlet temperature, fuel temperature and DPF load, overheat protection, manual gearbox limits per gear and with trailer, limits in mono- and bi-turbo modes.
Torque monitoring: level 1 limits and offsets, relative torque of the monitoring function.
Torque to quantity: conversion maps for mono- and bi-turbo modes, cold start and DPF regeneration.
Smoke limiter: lambda in normal and regeneration modes, full-load enrichment, altitude and temperature correction.
Main injection: start of main injection setpoints for all engine operating modes (EOM).
Pilot injection: start of pilot injection setpoints.
Injectors: injector energizing time.
Fuel rail: pressure setpoints for all modes, maximum pressure, fuel temperature correction, HP pump and PCV monitoring.
Boost: base boost pressure for all modes including high altitude, maximum boost in mono- and bi-turbo modes, controller upper limits, DPF load correction, turbocharger efficiency.
EGR and air control: air mass setpoints by mode, gear and altitude, EGR activation thresholds by quantity and torque, including during regeneration.
Diesel particulate filter (DPF): function and monitoring switches, soot mass thresholds, regeneration on fault, pressure and exhaust temperature sensor diagnostics.
Engine start: start torque, including fast start and high altitude.
Speed limiters: maximum vehicle speed, engine speed on pedal fault.
Cooling: fan control by coolant and gearbox oil temperature, after-run, PWM curves.
Configuration: DTC (switches, masks, codes).
ECU identification
TCEPro identifies the ECU from the firmware file automatically and opens the matching catalog. If a file does not open, send it to support and it will be added promptly.
Supported software versions
Bosch software number · calibration · JLR ECU part number
Range Rover Evoque
1037513068 · P1070G24 · BJ32-12K532-VBD
1037513068 · P1070G24 · BJ32-12K532-VBG
1037513068 · P1070G24 · BJ32-12K532-VCD
1037513068 · P1070G24 · BJ32-12K532-VCE
1037513068 · P1070G24 · BJ32-12K532-VCG
1037534642 · P963F73 · EJ32-12K532-VBE
1037534642 · P963F73 · EJ32-12K532-VCG
1037534642 · P963F73 · EJ32-12K532-VSE
1037534642 · P963F73 · EJ32-12K532-VSF
Land Rover Freelander 2
1037508786 · P785E50E · BH52-12K532-VBE
1037508786 · P785E50E · BH52-12K532-VBG
1037508786 · P785E50E · BH52-12K532-VCE
1037508786 · P785E50E · BH52-12K532-VCF
1037508786 · P785E50E · BH52-12K532-VCG
1037508786 · P785E50E · BH52-12K532-VFE
1037508786 · P785E50E · BH52-12K532-VFF
1037523343 · P1070G25 · DH52-12K532-VBE
1037523343 · P1070G25 · DH52-12K532-VCE
1037523343 · P1070G25 · DH52-12K532-VCF
1037523343 · P1070G25 · DH52-12K532-VFD
Land Rover Discovery Sport
1037541456 · P963F81 · FK72-12K532-VTE
If your software version is not listed, send the file to support and it will be added.
Applicability
Range Rover Evoque 2.2 TD4 / SD4 / eD4
Land Rover Freelander 2 2.2 TD4 / SD4 / eD4
Land Rover Discovery Sport 2.2 TD4 / SD4
The list of models and supported functions keeps growing.
