The DTС–Edit is designed to edit the DTC mask in Hitachi control units installed on Nissan, Infiniti, Renault cars, as well as disable/enable the immobilizer on most software.
All solutions are created on the basis of reverse engineering.
At the moment, more than 1000 software have been disassembled.
Installed on Almera N15 and Primera P11 vehicles.
Installed on Almera N15 and Primera P11 vehicles.
Supported codes:
The module allows you to remove errors, disable and enable the immobilizer function, and calculate CS.
Installed on Avenir W11, Bluebird Sylphy, Cube Z11, Expert W11, March-Micra K12, Note, Sunny, X-Trail, Presage, Wingroad Y11.
Installed on Avenir W11, Bluebird Sylphy, Cube Z11, Expert W11, March-Micra K12, Note, Sunny, X-Trail, Presage, Wingroad Y11.
Supports codes:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Installed on 350Z cars-Fairladi Z33, Almera N16, Almera Classic B10, Altima, Armada TA60, Bluebird G11, Cefiro A31, Cube Z11, Elgrand E51, Frontier, Lafesta, Lyberti, Maxima, Murano, Note, Pathfinder, Patrol Y61, Primera P12, Qashqai-Dualis-Rogue, Quest, Sentra, Skyline, Teana J31, Tiida, X-Trail.
Installed on 350Z-Fairladi Z33, Almera N16, Altima, Armada TA60, Bluebird G11, Cefiro A31, Cube Z11, Elgrand E51, Frontier, Lafesta, Lyberti, Maxima, Murano, Note, Pathfinder, Patrol Y61, Primera P12, Qashqai-Dualis-Rogue, Quest, Sentra, Skyline, Teana J31, Tiida, X-Trail.
Supported codes:
It allows you to remove errors, disable and enable the immobilizer function, and count CS.
Installed on cars 350Z, Altima, Armada, Cube, Elgrand E52, Frontier, Fuga Y50, GT-R R32, Juke YF15, Lafesta, Maxima, Murano, Note, Pathfinder, Qashqai, Sentra, Serena, Stagea, Teana, Tiida, Versa, Xterra.
Installed on cars 350Z, Altima, Armada, Cube, Elgrand E52, Frontier, Fuga Y50, GT-R R32, Juke YF15, Lafesta, Maxima, Murano, Note, Pathfinder, Qashqai, Sentra, Serena, Stagea, Teana, Tiida, Versa, Xterra.
Supported codes:
9ZVKM4N7
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Installed on cars Fuga Y51, Patrol Y62.
Installed on cars Fuga Y51, Frontier D40, Patrol Y62.
The module supports the following codes:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Module 6 Infiniti Hitachi SH7055
The module supports the following codes for the FX35, FX45, G35, QX56 models:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Module 7 Infiniti Hitachi SH7058
The module supports the following codes for EX35, FX35, FX45, G25, G35, G37, JX35, M25, M35, QX50, QX56, QX60 models:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Module 8 Infiniti Hitachi SH7059
The module supports the following codes for EX37, FX37, FX50, G37, M37, M56, QX56, QX70, QX80 models:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Installed on Renault Koleos, Laguna, Latitude cars.
Installed on Renault Koleos, Laguna, Latitude cars.
The module supports the following codes:
Allows to remove errors, disable and enable the immobilizer function, and count CS.
Module 10 Nissan Almera classic B10
Installed on Nissan Almera classic B10 vehicles.
Supports codes:
Check the error removal, disable and enable the immobilizer function, checksum calculation.
The following Nissan Altima, Rogue, X-Trail T32 IDs are supported:
2XH5DCZEA
2XH5DLSEE
3TRK2BCPN6A
3TRK2BK6N661
3TRK2BKXN662
3TRK2BQ2N663
3XH5DU9EB
3XH5DW1EC
4P32RJANH
4P32RNCN7
4P32RVMNC
4P32RYYNE
4TRK2BN3N1
5P32RVNN2
60AE8NH
6P32R27N1
6P32R7WN2
6TRK2D5BN64
7P32RARN3
7P32RARN31
7P32RCFN4
7TRK2DBLN4
Errors removal, checksum correction.
The following Nissan Altima, Rogue, X-Trail T32 IDs are supported:
2XH5DCZEA
2XH5DLSEE
3TRK2BCPN6A
3TRK2BK6N661
3TRK2BKXN662
3TRK2BQ2N663
3XH5DU9EB
3XH5DW1EC
4P32RJANH
4P32RNCN7
4P32RVMNC
4P32RYYNE
4TRK2BN3N1
5P32RVNN2
60AE8NH
6P32R27N1
6P32R7WN2
6TRK2D5BN64
7P32RARN3
7P32RARN31
7P32RCFN4
7TRK2DBLN4
Errors removal, checksum correction.
BitEdit
BitEdit is a modern software for editing automative ECU calibrations. It allows to change most dynamic options of the engine. The software works in the following way: you open an ECU flash file, it gets identified and you are shown a list of calibrations, that can be edited. After the changes are completed you can save a new file ready for writing. BitEdit editor is good for professionals and newbie tuners.
Attention! BitEdit is only a calibration editor, it does not allow to read or write internal memory of ECUs, it does not fix checksums after editing — this function must be perfomed by your flasher tool.
Attention! Modules cannot be deactivated remotely. Please be ready to send the dongle back in case of wrong purchase.
The technical support is provided by the developer: [email protected]
M&D Flasher
M&D Flasher is a professional tool for dashboard repair/replacement and true mileage restoration. The tool also works with immobilizers, airbags and ECUs. The software is module based and is protected with a USB dongle. It requires a J2534 adapter. It has been tested with the following adapters Dialink and Scanmatik.
System requirements
Technical support is porvided by the developer directly.
S&V Edit
S&V Edit provides files for a wide variety of vehicles.
It allows editing files from the ECU as well as removing (disabling in ECU firmware package) such systems as EGR, DPF, EVAP, CAT, IMMO, AdBlue as well as for removing DTC errors. It does not do checksum corrections as all the flashers have a checksum correction function.
Restriction: 10 usages per day.
ProBYTE
Edit Firmware Probyte is an editor tool that disables various systems in a file. It works with a dongle, does not require subscription and has no limits per daily usage. Internet connection is required! Probyte works with:
The technical support is provided by the developer directly.
The activation is done within 3 working days.
ProBYTE is also available in Full Version which will include all the future modules for free.
